-
How to choose stepper motor or servo motor
The difference between the motors used in the electric cylinders is different, but the material safety factors are different in terms of dynamic load and static load, and the models of the corresponding electric cylinders are also different. The stepping motor is an open-loop control element stepping motor that converts the electric pulse signal into an angular displacement or a linear displacement. In the case of non-overloading, the rotation speed and the abort orientation of the motor depend only on the frequency and pulse of the pulse signal.
MORE + 2018-07-09 -
Electric slide features and advantages
The main features of the electric slide can be expressed from three main parameters: Accuracy: Different industries have different requirements for the accuracy of electric sliding tables. Therefore, there is no specific regulation on the accuracy of electric sliding tables. The accuracy can be classified according to large machine tools and small and medium-sized machine tools. Large machine tools generally have an accuracy of 1 meter and 1 wire. The accuracy requirements for small and medium-sized machine tools are generally higher than 0.1mm.
MORE + 2018-06-29 -
2018 South China International Industrial Automation Exhibition
Pi Shenzhen Ruijian will participate in the 2018 South China International Industrial Automation Exhibition. Welcome to visit! Time: June 27, 2018 - June 29, 2018 Booth: Booth No. 2.44
MORE + 2018-06-22 -
Notice of the 12th (2018) International Solar Photovoltaic and Smart Energy (Shanghai) Exhibition
Pi Shenzhen Ruijian will participate in the 12th (2018) International Solar Photovoltaic and Smart Energy (Shanghai) Exhibition. Welcome to visit! Time: May 28, 2018 - May 30, 2018 展位：展馆N5 展位号6
MORE + 2018-05-24 -
Notice of Change in the 20th China International Industry Fair
Received a notice from the Shanghai Industry Fair, due to the conflict between the November 2018 schedule and the first China International Import Expo, in order to avoid the interaction between the two national exhibition projects in the same month. According to the discussion of the Organizing Committee of China International Industry Fair, the date of the China International Industry Fair in 2018 will be adjusted as follows; The 20th China International Industrial Fair will be held at the National Convention and Exhibition Center (Shanghai) from September 19 to 23, 2018. Held. Please understand the inconvenience caused by the customers and friends of each exhibition to adjust the time. Pi Ruijian is looking forward to meeting you in September!
MORE + 2018-04-19
Phone QR code